OBAMED Inc. is proud to present the first light-weight, FDA 510(k) approved, compact, portable Anesthesia Machine specifically designed for surgical locations where space or access is limited, such as Office Based Anesthesia and MRI scan rooms, or any location where size, mobility and portability are important.

The OBA-1® and OBA-1® MRI units are equipped for use with oxygen and medical air, but by NOT providing nitrous oxide, the inadvertent administration of a hypoxic gas mixture is eliminated.

The FDA approved OBA-1® MRI Compact Anesthesia Unit can be safely used in a MRI scan room with shielded or unshielded magnets. The OBA-1® MRI Unit may be placed within the 5 Guass line immediately next to the patient without interfering with the surgical or the scanning procedure.

OBA-1® MRI Unit is being used in various MRI scanner models from Picker, GE and Siemens at 0.2 - 3.0 tesla.

To be used for:

• Office Based Anesthesia (OBA)
• MRI scan rooms
• Dental anesthesia
• Missionary off-shore anesthesia
• Remote locations in hospitals outside O.R.
• Disaster scenes and mass casualty incidents
• Front-line military hospitals
• Shipboard, aircraft
Anywhere general anesthesia is needed

Standard configuration of the OBA-1®
WIDTH: 16 inches
(40.6 cm)
DEPTH: 9.5 inches
(24.1 cm)
HEIGHT: 15 inches
(38.1 cm) to top of Inspiratory/Expiratory valves
WEIGHT: 35 pounds
(15.7 kg)
Including the following items:
• (1) filled Penlon Sigma Delta® Vaporizer
• (2) ThermH2Osorb™ Canisters (filled)
• (1) 10' (300 cm) Oxygen Supply Hose
• (1) 10' (300 cm) Medical Air Supply Hose

Gas Supply Source:
45-55 psi Oxygen and Medical Air
Oxygen Flush:
50 L/min Oxygen at 50 psi
Fresh Gas Flow:
0-10 L/min Oxygen; 0-10 L/min Medical Air

2 Year Warranty on parts and labor